C14 plug to C15 connector
For a C13 PDU outlet and compatible equipment with a C16 hot-condition inlet. These cords use a standard non-locking connection.
C14 to C15 Red
Red C14 to C15 cords
Identify hot-condition equipment feeds at a glance
Red C14 to C15 power cords connect C13 power-source outlets to equipment fitted with C16 inlets. The coloured jacket helps distinguish documented A/B feeds, rack zones or equipment groups in data centres and technical installations.
ImportantRed has no universal electrical meaning. It does not automatically identify a live phase, emergency supply or backup feed. Apply the colour only according to your own site documentation.
Select the required length
10 A / 250 V
The listed red range uses H05V2V2-F 3G1.0 mm² cable. Keep the complete assembly within its stated rating.
Eight lengths from 0.5 to 3.0 m
Standard lengths are supplemented by 1.2 m and 1.8 m options for more precise rack layouts.
Confirm the complete temperature specification The C15 connector is intended for the C16 hot-condition interface, but this alone does not establish the temperature limit of the complete cord. Verify the selected SKU and equipment requirement.
Page 1 of 1 -
8 items total
Product sorting
Length
8 items to display
List of products
Listing controls
8 items total