C14 plug
Mates with an IEC C13 outlet on the PDU or other power-distribution equipment.
C14 to C19 Power Cords
Mixed IEC connections
Connect C20 equipment to a C13 PDU outlet
C14 to C19 power cords connect an IEC C13 power-source outlet to equipment fitted with a C20 inlet. They are intended for installations where this specific cross-connection is required.
ConnectionC14 plug at the power source; C19 connector at the equipment. The C19 connector does not increase the capacity available from the C14 source connection.
Selection points
C19 connector
Mates with an IEC C20 equipment inlet; verify that the connected device does not exceed the complete cord rating.
Specific cross-connection
Use only where the outlet, equipment input and electrical load have all been checked for this configuration.
This is not a higher-power feed The complete assembly is limited by its lowest-rated component and approval. Confirm the load and product documentation before ordering; contact MK Cable if the application is unclear.
Page 1 of 1 -
4 items total
Product sorting
Length
4 items to display
List of products
Listing controls
4 items total