C20 plug to C19 connector
For a C19 PDU outlet and compatible equipment with a C20 inlet. These cords use a standard non-locking IEC connection.
C20 to C19 Red
Red C20 to C19 cords
Identify 16 A equipment feeds at a glance
Red C20 to C19 power cords connect C19 power-source outlets to equipment fitted with C20 inlets. The coloured jacket helps distinguish documented A/B feeds, rack zones or equipment groups in data centres and other technical installations.
ImportantRed has no universal electrical meaning. It does not automatically identify a live phase, emergency supply or backup feed. Apply the colour only according to your own site documentation.
Select the required length
16 A / 250 V
The listed red range uses H05VV-F 3G1.5 mm² cable. Keep the complete power path within the rating of its lowest-rated component.
Eight lengths from 0.5 to 3.0 m
Standard lengths are supplemented by 1.2 m and 1.8 m options for more precise rack layouts.
Check the complete installation rating The C20/C19 interface supports higher-current applications, but available load is still limited by the PDU, outlet, branch circuit, equipment and selected cord. Verify every component before installation.
Page 1 of 1 -
8 items total
Product sorting
Length
8 items to display
List of products
Listing controls
8 items total